POLE
MOUNT

VARESE

VARESE

VARESE

The simple soft lines of VARESE adds refreshing styling to traditional and modern settings alike. Well proportioned for the illumination of streetscapes and pedestrian gathering areas, the luminaire features a cast aluminum top and base with integral fitter, making a visually seamless transition to the pole to produce a single, unified appearance. Cylindrical lens is clear acrylic. Optics include a choice of symmetric or asymmetric distributions to satisfy varying site lighting requirements. Straight round pole is available in aluminum or steel. Steel pole is hot-dip galvanized prior to painting for proven long term corrosion resistance. All hardware is stainless steel.

VARESE LVC
HOUSING
Luminaire base with integral fitter and top are cast aluminum. Clear acrylic cylindrical lens with bonded cast aluminum top twists and locks onto the housing without the use of tools. Luminaire base houses the electrical components and is secured to pole top with two rows of three recessed setscrews. Weather-tight bushing at base of housing provides a weather-tight seal.

OPTICS
Optical assembly consists of one LEVO C LED module mounted within the cylindrical clear acrylic lens. The module consists of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, IV, or V optics. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades. CRI is 80+.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to the LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 37 watts. Optional 0-10v DC dimming is available on request.

DELIVERED LUMEN OUTPUT / BUG RATING
3000K
Type 2 = 3248 lumens / B1-U1-G1
Type 3 = 3356 lumens / B1-U2-G1
Type 4 = 3261 lumens / B1-U1-G1
Type 5 = 3542 lumens / B2-U1-G1

4000K
Type 2 = 3456 lumens / B1-U1-G1
Type 3 = 3571 lumens / B1-U2-G1
Type 4 = 3469 lumens / B1-U1-G1
Type 5 = 3768 lumens / B2-U1-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

POLE
Round straight pole is available in aluminum or steel.

Round straight steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.126". Pole shall show no seam along shaft. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10', 12' or 14' overall.

Aluminum pole is manufactured from seamless 6061 aluminum tubing with nominal wall thickness of 0.187". Pole is heat treated to produce a T6 temper. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Tenon is machined to match the inside diameter of the pole, then inserted into the pole shaft and plug welded, showing no visible weld at the transition. One-piece base cover is 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10', 12', or 14' overall.

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

LUMINAIRE WEIGHT: 25 lbs
LUMINAIRE EPA: 1.5 sq ft

INGRESS PROTECTION: IP65

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

VARESE
VARESE

ORDER INFORMATION

Model

VAR200

LED Module

1LVC - 1 module

Color Temperature

WW - 3000K, NW - 4000K

Volt

UNV - 120-277V

Distribution

T2 - Type II, T3 - Type III, T4 - Type IV, T5 - Type V

Mounting

A - Post Top

Pole

10RS - 10' Round Straight, 12RS - 12' Round Straight, 14RS - 14' Round Straight

Pole Material

S - Steel, A - Aluminum

Finish

SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color

Option

DIM - 0-10v Dimming, GFCI - GFCI Receptacle, HSS - House Side Shield, TVSS20 - 20KV Surge Suppressor, BA24S - 24" Single Banner Arm, BA24D - 24" Double Banner Arms

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
csm_FARO_ProdHeader_544f6f75b8.png

< PRODUCT NAME >

< PRODUCT MODEL >