®

LINEA AMBER LED
HOUSING
Single piece bollard consists of integral luminaire head and shaft fabricated from rectangular 6061 aluminum alloy with radiussed corners. Nominal wall thickness is 0.187" with cross-section of 7.5" x 3.5". LED light engine and driver are housed in self-contained weather-proof powerpack enclosure within the bollard and removable with a single fastener. Lens is clear impact-resistant acrylic with anti-reflective coating for increased efficiency. LED array is thermally managed using convection and transmission of heat through the use of an aluminum heat sink and the luminaire housing. All hardware is stainless steel.

OPTICS
LED light engine consists of five multi-chip amber LED arrays fitted with prismatic lens optics to produce a uniform asymmetric light distribution pattern suitable for pathways and sidewalks. Luminaire emits zero uplight at or above 90 degrees horizontal and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. LEDs are true amber with dominant wavelength of 590-595 nanometers and no light below 560 nanometers.

ELECTRICAL
Integral LED driver is housed in luminaire head. Power consumption is 13 watts at 350mA. Input voltage range is 120v - 277v AC, 50-60 Hz. LED driver shall be UL recognized.

DELIVERED LUMENS / BUG RATING
Standard model: 344 lumens / B0-U1-G1
With beach-side shield: 241 lumens / B0-U1-G1

NOTE:
Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Flangeless mounting is standard. Optional external flange mounting available on request.

WEIGHT
20 lbs

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special RAL colors available on request.

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.