CITY ELEMENTS 180
City Elements 180 offers design professionals the flexibility of a multi-purpose lighting system in a single architectural structure. It may be configured with a single top element for area lighting and may include up to two additional lighting modules directly below for accenting or highlighting of facades, landscaping, or statuary. Column may be specified with heights up to twenty feet. A companion bollard is also available. Housing styles for the top element may be with 360° lens with a choice of symmetric or asymmetric optics or an asymmetric housing for house side shielding. Luminaire housing and extruded aluminum shaft with flush handhole are finished in finely textured paint. All hardware is stainless steel.
CITY ELEMENTS FAMILY
CITY ELEMENTS 230
CITY ELEMENTS 180 AS/BS400 LED
Luminaire housing with 120° polycarbonate window is fabricated from extruded 6061 aluminum. Access door at rear of housing provides access to optics and electrical gear and is sealed with single piece silicone gasket. Horizontal orientation of the luminaire housing is factory set to customer specification to meet site lighting requirements. All hardware is stainless steel.
Light engine consists of single CoB LED with reflector. Available distributions include 18°, 29°, or 55° symmetric distribution suitable for accenting or highlighting. Optics are vertically adjustable +/- 30° from horizontal and +/- 10° left or right within the housing. LED light source is available in 3000K or 4000K color temperatures with a CRI greater than 80.
Electronic LED driver provides 350mA drive current to the CoB LED. Universal driver accepts input voltage range from 120v to 277v at 50/60Hz. Power consumption is 11watts. Power factor is greater than 0.95. Optional 0-10v dimming available on request.
18°: 888 lumens
29°: 938 lumens
55°: 865 lumens
18°: 936 lumens
29°: 989 lumens
55°: 911 lumens
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
CERTIFICATION: CSA/US Certified for Wet Locations
INGRESS PROTECTION: IP65
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
AS400-L3.3 - Accenting (Top) | BS400-L3.3 - Accenting (Intermediate)
30K - 3000K | 40K - 4000K
UNV - 120-277v
T2 - Type II | T3 - Type III | T4 - Type IV | T5 - Type V
DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | MB - Matte Black | SG - Silver Grey | CC - Custom RAL
DIM - 0-10v Dimming | GFCI - GFCI Receptacle | TVSS20 - 20KVA Surge Suppressor | HSS - House Side Shield