CE - 180 AR LVC
CE - 180 AA LVC
Illuminating bollard is part of the comprehensive CITY ELEMENTS product family of modular light columns. The slender 7'' diameter bollard gracefully enhances pedestrian pathways. Mounting options include internal flange with anchor bolts or external flange with anchor bolts with base cover. Extruded aluminum shaft and housing are finished in finely textured paint. All hardware is stainless steel.
CITY ELEMENTS FAMILY
CITY ELEMENTS 180 AA LVC
Bollard shaft is extruded from 6061-T6 aluminum with nominal diameter of 7.1" and wall thickness of 0.28". Luminaire consists of upper housing element and cylindrical lens bonded to the bollard shaft. Lens with 240° aperture is clear acrylic with thickness of 0.16". Optical and electrical unit with machined aluminum cap installs into the luminaire from the top. The removable assembly is secured with a single stainless steel thumbscrew concealed within the bollard shaft and accessed via the hand hole. Single piece silicone gasket provides weather-tight seal when installed. Electrical quick disconnect facilitates ease of maintenance when removing or replacing the assembly. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Machined aluminum flange plate is 1/2" thick and welded to the shaft. Bollard is available in 3', 3.5', and 4' heights. All hardware is stainless steel.
Optical assembly consists of one LEVO C LED module mounted within the cylindrical clear acrylic lens. The module consists of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades. CRI is 80+.
Electronic LED driver supplies 250mA drive current to the LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 15 watts. Optional 0-10v DC dimming is available on request.
DELIVERED LUMEN OUTPUT/BUG RATING
Type 2 = 1170 lumens / B0-U1-G0
Type 3 = 1127 lumens / B0-U1-G1
Type 4 = 1113 lumens / B0-U1-G1
Type 2 = 1245 lumens / B0-U1-G0
Type 3 = 1199 lumens / B0-U1-G1
Type 4 = 1184 lumens / B0-U1-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Bollard with external flange mounts installs onto four 1/2" x 15" x 3" galvanized steel anchors embedded into concrete foundation (by others). Base cover is fabricated from 0.080" spun aluminum and finished to match luminaire. Anchor bolts may be pre-shipped in advance on request.
Internal flange mount installs onto four 1/2" x 15" x 3" galvanized steel anchors embedded into concrete foundation (by others). Anchor bolts may be pre-shipped in advance on request.
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
CSA Certified for Wet Locations
CE180-P3-AA450 - 3' Height, CE180-P3.5-AA450 - 3.5' Height, CE180-P4-AA450 - 4' Height
1LVC - 1 Module
30K - 3000K, 40K - 4000K
UNV - 120-277V
T2 - Type II, T3 - Type III, T4 - Type IV
CR01 - Internal flange w/ anchor bolts, CR02 - External flange w/ anchor bolts & base cover
N/A - Not applicable
SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color
DIM - 0-10v Dimming, GFCI/IU - Internal GFCI Receptacle, TVSS20 - 20KV Surge Suppressor, CONTACT FACTORY for Enhanced Security Bollard Options