Cylindrical wall mount luminaire consists of fitter base with shade supported by four rectangular rods. Heavy-duty cast aluminum base anchors the support rods, and is machined to include groove for gasketing and mounting surface for the lens and driver enclosure. Shade is spun aluminum and free from burrs and sharp edges. Shade and base are gasketed to provide a weather-tight seal to the clear acrylic cylindrical lens. Luminaire slip fits 3" O.D. tenon on the wall bracket, and has built-in stop to limit insertion depth to 3". Two offset rows of three 10mm recessed setscrews secure the luminaire to the tenon. All hardware is stainless steel.
The LED light engine is an enclosed system with a vertically oriented optical quality acrylic rod capped with a reflective element to redirect light from the single CoB LED outward for vertical and horizontal illumination. Light shaping diffusing film on the inside of the lens controls and shapes light distribution for optimal performance while minimizing brightness. Thermal management is provided via heat sinking and convective cooling within the sealed system.
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Electronic LED driver supplies 700mA drive current to the LED. The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Driver is high power factor with performance greater than 90%. Power consumption is 24 watts. Optional 0-10v dimming available on request.
LED DELIVERED LUMENS / BUG RATING (Pending final photometric test results)
3000K: 3750 lumens / B1-U4-G3
4000K: 4125 lumens / B2-U4-G3
3000K: 2800 lumens / B1-U3-G3
4000K: 3100 lumens / B1-U3-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of
HessAmerica. Consult factory for current technical data.
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places by customer-supplied hardware. Two parallel square tubes with 3" O.D. tenon are welded to the 0.24" thick mounting plate. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Bracket assembly ships pre-wired with fish tape.
Housing is cleaned ultrasonically prior to painting. Standard Primar™ finish is finely textured matte silver metallic, dark grey, graphite grey, black, or dark bronze. Special RAL colors available on request.
INGRESS PROTECTION: IP54
CERTIFICATION: CSA/US Certified for Wet Locations
Limited product warranty period including the LEDs is five years. Driver shall carry the respective manufacturer's limited warranty.