TRENTO
Design simplicity and precision machining distinguish the TRENTO. Housing is constructed of high grade billet aluminum with satin anodized finish. Translucent acrylic lens creates a soft ambiance, while the matte acrylic end lens adds a contrasting lighting element. All hardware is stainless steel. Luminaire may be mounted to wall or ceiling.
Specification
TRENTO 150 LED
HOUSING
Housing consists of cylindrical matte acrylic lens retained by two lens rings mechanically fastened together with three internal aluminum support rods. Lens rings are precision-machined from 6082 billet aluminum, then satin anodized. Lens rings have machined groove for one-piece EPDM gasket to provide a weather-tight seal to the lens. Outer lens ring has circular aperture for diffused end lens. Tempered glass end lens is white flashed opal glass, sealed to the lens ring with one-piece closed cell silicone gasket. Luminaire mounts to machined aluminum back plate housing the lamp and electrical components with three recessed setscrews. Back plate is satin anodized to match luminaire and gasketed to provide a weather-tight seal to the housing. Back plate mounts to the wall surface over 3.5'' octagon junction box with factory-supplied wall anchors. All hardware is stainless steel.
OPTICS
CoB LED is positioned within the matte acrylic cylindrical lens providing diffuse symmetrical distribution. Diffused end lens provides subtle radiant glow.
ELECTRICAL
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LEDs is 350 mA. Power consumption is 14 watts.
LED DELIVERED LUMENS / BUG RATING
3000K: 1051 lumens / B0-U3-G1
4000K: 1084 lumens / B0-U3-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE WEIGHT: 5.5 lbs
INGRESS PROTECTION: IP54
CERTIFICATIONS: CSA Certified for Wet Locations
FINISH
Standard finish is satin anodized aluminum.
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Housing consists of cylindrical matte acrylic lens retained by two lens rings mechanically fastened together with three internal aluminum support rods. Lens rings are precision-machined from 6082 billet aluminum, then satin anodized. Lens rings have machined groove for one-piece EPDM gasket to provide a weather-tight seal to the lens. Outer lens ring has circular aperture for diffused end lens. Tempered glass end lens is white flashed opal glass, sealed to the lens ring with one-piece closed cell silicone gasket. Luminaire mounts to machined aluminum back plate housing the lamp and electrical components with three recessed setscrews. Back plate is satin anodized to match luminaire and gasketed to provide a weather-tight seal to the housing. Back plate mounts to the wall surface over 3.5'' octagon junction box with factory-supplied wall anchors. All hardware is stainless steel.
OPTICS
CoB LED is positioned within the matte acrylic cylindrical lens providing diffuse symmetrical distribution. Diffused end lens provides subtle radiant glow.
ELECTRICAL
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LEDs is 350 mA. Power consumption is 14 watts.
LED DELIVERED LUMENS / BUG RATING
3000K: 1051 lumens / B0-U3-G1
4000K: 1084 lumens / B0-U3-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE WEIGHT: 5.5 lbs
INGRESS PROTECTION: IP54
CERTIFICATIONS: CSA Certified for Wet Locations
FINISH
Standard finish is satin anodized aluminum.
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Documents
Catalogue page | Hessamerica_TRENTO_wl.pdf (PDF, 1.85 MB) |
Drawings | Trento_TR150.png (PNG, 2.34 KB) |
Product brief |
IES / Image
Photometric reports | TR150-NW.ies (BIN, 67.73 KB) TR150-WW.ies (BIN, 67.72 KB) |
Mounting detail |
hessamerica_mounting_details_template_tr150.png (PNG, 175.13 KB) |
Product images | TRENTO.zip |