Truncated wedge shaped housing is cast aluminum. Luminaire mounts to bracket with concealed hardware. Frameless tempered glass lens is hinged and is sealed to the housing with one-piece closed cell neoprene gasket and secured with single quarter-turn fastener for tool-less access to optical compartment. Flat lens is 0.24" thick with screen-printed masking for aesthetics. Power cord exits luminaire at the rear of the housing into wire way on the bracket arm. Cord is sealed with a weather tight strain relief bushing at the luminaire. All hardware is stainless steel.
Optics include two individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.
LED DELIVERED LUMEN OUTPUT / BUG RATING
Type II: 2534 lumens / B1-U0-G0
Type III: 2563 lumens / B1-U0-G0
Type IV: 2320 lumens / B1-U0-G0
Type II: 5068 lumens / B1-U0-G1
Type III: 5126 lumens / B1-U0-G1
Type IV: 4639 lumens / B1-U0-G1
Type II: 2699 lumens / B1-U0-G0
Type III: 2730 lumens / B1-U0-G0
Type IV: 2470 lumens / B1-U0-G1
Type II: 5398 lumens / B1-U0-G1
Type III: 5459 lumens / B2-U0-G1
Type IV: 4941 lumens / B1-U0-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 37 watts for 1 LEVO C modules and 72 watts for two LEVO C modules. Optional 0-10v DC dimming is available on request.
Fabricated aluminum mounting bracket consists of rectangular tubing welded to rectangular mounting plate. Bracket attaches to surface in four places.
Housing is ultrasonically cleaned prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
INGRESS PROTECTION: IP65
CERTIFICATION: CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.