RESIDENZA S
Possible configurations
References
Select your desired model variant
RESIDENZA 200 S LED
RESIDENZA 200 S
The simple cylindrical form of RESIDENZA is available for pedestrian scale wall mounting applications. Cast aluminum housing with integral fitter houses electrical components. Matte acrylic lens twists and locks onto housing for tool-less relamping. Cleanly styled mounting arm is fabricated aluminum. Optional externally mounted decorative house side shield is available on request. All hardware is stainless steel. Standard colors; matte silver grey metallic, dark grey, or graphite grey. Special colors available.
Specification
RESIDENZA 200 S LED
HOUSING
Luminaire base with integral fitter is cast aluminum and is secured to tenon top with three recessed setscrews. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools providing access for relamping. All hardware is stainless steel.
OPTICS
LED module consists of single high-power CoB LED and edge-lit cylindrical acrylic rod positioned within the matte acrylic lens. Matte acrylic lens provides diffuse illumination with low brightness.
ELECTRICAL
Electrical components are mounted in the electrical compartment at the base of the luminaire housing. Electronic LED driver supplies 700mA drive current . The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts. Optional 0-10v dimming available on request.
DELIVERED LUMENS / BUG RATING
3000K: 4918 lumens / B1-U5-G3
4000K: 6098 lumens / B2-U5-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Wall mount bracket assembly is fabricated aluminum and ships prewired with fishtape.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
INGRESS PROTECTION: IP65
CERTIFICATION
CSA/US Certified for Wet Locations
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Luminaire base with integral fitter is cast aluminum and is secured to tenon top with three recessed setscrews. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools providing access for relamping. All hardware is stainless steel.
OPTICS
LED module consists of single high-power CoB LED and edge-lit cylindrical acrylic rod positioned within the matte acrylic lens. Matte acrylic lens provides diffuse illumination with low brightness.
ELECTRICAL
Electrical components are mounted in the electrical compartment at the base of the luminaire housing. Electronic LED driver supplies 700mA drive current . The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts. Optional 0-10v dimming available on request.
DELIVERED LUMENS / BUG RATING
3000K: 4918 lumens / B1-U5-G3
4000K: 6098 lumens / B2-U5-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Wall mount bracket assembly is fabricated aluminum and ships prewired with fishtape.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
INGRESS PROTECTION: IP65
CERTIFICATION
CSA/US Certified for Wet Locations
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Documents
| Catalogue page | Hessamerica_RESIDENZA_200_200S_wl.pdf (PDF, 554.57 KB) |
| Drawings | residenza_w_sw_usa.png (PNG, 2.34 KB) |
| Product brief |
IES / Image
| Photometric reports | RS200S-LED-3K.ies (BIN, 18.94 KB) RS200S-LED-4K.ies (BIN, 18.94 KB) |
| Mounting detail |
hessamerica_mounting_details_template_rs200w.png (PNG, 25.8 KB) |
| Product images | RESIDENZA_S.zip |
