Luminaire consists of base, lens with decorative ring assembly, and secondary reflector with support struts. Decorative ring assembly surrounding lens is secured to the base with socket head cap screws and consists of aluminum rings separated by spacers. Simple cast aluminum luminaire base with integral slip fitter anchors three cast aluminum indirect reflector support struts with socket head cap screws and provides mounting surface for the optical assembly. Borosilicate glass lens has clear top with etched sidewalls and is sealed by compression to the luminaire base with single piece closed cell rubber gasket when the decorative ring assembly is installed. Top ring of assembly is separated from the glass lens with single piece ''D'' profile silicone gasket to prevent glass to metal contact. Spun aluminum indirect reflector is finished in high-reflectance white paint. Luminaire slip fits tenon on wall mounting bracket and has built-in stop to limit insertion depth to 4.5''. Two offset rows of three 8mm recessed setscrews secure the luminaire to the tenon. All hardware is stainless steel.
Single COB LED is positioned within polycarbonate reflector producing a 40° beam. The reflector with specular metallic finish, protected by clear coat, projects light upward through the clear borosilicate top lens onto the secondary reflector, providing a symmetrical Type V distribution. Etched sidewall on lens provides a subtle radiant glow for accenting. Secondary reflector is finished with white powder coat finish on the underside for increased efficiency.
Electronic LED driver 1050mA drive current to the CoB LED. Universal driver accepts input voltage range from 120v to 277v at 50/60Hz. Power consumption is 41 watts. Power factor is greater than 0.95. Optional 0-10v dimming available on request.
DELIVERED LUMENS / BUG RATING
3000K: 2201 lumens / B1-U3-G1
4000K: 2305 lumens / B1-U3-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE WEIGHT: 15 LBS
LUMINAIRE EPA: 1.7 SQ FT
Wall mounting bracket is fabricated aluminum and mounts to wall surface in four places with hardware supplied by others.
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
CERTIFICATION: UL Listed for Wet Locations
INGRESS PROTECTION: IP54
Limited product warranty period including the LED is five years. Driver shall carry the manufacturer's limited warranty.