Luminaire base with integral fitter is cast aluminum and is secured to pole top with three recessed setscrews. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools providing access for relamping. Luminaire is available in single or twin mount configurations. Electrical gear is located in the luminaire base.
LED module consists of single high-power CoB LED and edge-lit cylindrical acrylic rod positioned within the matte acrylic lens. Matte acrylic lens provides diffuse illumination with low brightness.
Electrical components are mounted in the electrical compartment at the base of the luminaire housing. Electronic LED driver supplies 700mA drive current . The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts per luminaire or 112 watts total . Optional 0-10v dimming available on request.
DELIVERED LUMENS / BUG RATING
3000K: 4918 lumens / B1-U5-G3
4000K: 6098 lumens / B2-U5-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Upper shaft of laddered steel pole and integral bracket arms are fabricated from two parallel 0.114" thick rectangular tube sections separated by horizontal steel plates welded at evenly spaced intervals along the length of the shaft. Bracket arms have integral tenon to accept luminaires. Shaft at base of pole is cold drawn over mandrel, electric-weld, mechanical square steel tubing with nominal wall thickness of 0.157". Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 12'. Pole ships pre-wired with fish-tape.
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
INGRESS PROTECTION: IP65
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.