Luminaire base with integral fitter is cast aluminum and is secured to pole top with three recessed setscrews. Clear acrylic cylindrical lens with bonded aluminum top is secured to the housing with single stainless steel cap screw. Satin anodized rings encircle the LED module at the top of the lens compartment as a decorative element.
Optical assembly consists of one LEVO C LED module mounted within the cylindrical clear acrylic lens. The module consists of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, IV, or V optics. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades. CRI is 80+.
Electronic LED driver supplies 700mA drive current to the LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 37 watts per luminaire or 74 watts total. Optional 0-10v DC dimming is available on request.
DELIVERED LUMEN OUTPUT / BUG RATING (Per luminaire)
Type 2 = 3248 lumens / B1-U1-G1
Type 3 = 3356 lumens / B1-U2-G1
Type 4 = 3261 lumens / B1-U1-G1
Type 5 = 3542 lumens / B2-U1-G1
Type 2 = 3456 lumens / B1-U1-G1
Type 3 = 3571 lumens / B1-U2-G1
Type 4 = 3469 lumens / B1-U1-G1
Type 5 = 3768 lumens / B2-U1-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Upper shaft of laddered aluminum pole and integral bracket arms are fabricated from two parallel 0.114" thick rectangular tube sections separated by horizontal plates welded at evenly spaced intervals along the length of the shaft. Bracket arms have integral tenon to accept luminaires. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Nominal pole height is 12'. Pole ships pre-wired with fish-tape.
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
LUMINAIRE WEIGHT: 25 lbs
LUMINAIRE EPA: 1.5 sq ft
INGRESS PROTECTION: IP65
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer?s limited warranty.