Rectangular luminaire housing with integral fitter is extruded aluminum with no visible welds. Frameless tempered glass lens is hinged and secured in place with a single stainless steel quarter-turn fastener for tool-less access to the optical compartment. Lens seals to the housing with one-piece silicone gasketing when closed. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire mounts to tenon on pole with matching profile and secured with four socket head cap screws on top of the housing. All hardware is stainless steel.
Optics consist of 4 individual LED modules for the upper luminaire, and 2 individual LED modules for the lower luminaire. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+. Optional internal house side shield available on request.
LED DELIVERED LUMEN OUTPUT / BUG RATING
4 Modules: 144 watts
Type II - 3000K: 13588 lumens / B2-U0-G2
Type III - 3000K: 12918 lumens / B3-U0-G2
Type IV - 3000K: 12156 lumens / B2-U0-G2
Type II - 4000K: 14754 lumens / B3-U0-G2
Type III - 4000K: 14027 lumens / B3-U0-G2
Type IV - 4000K: 13199 lumens / B2-U0-G2
2 Modules: 72 watts
Type II - 3000K: 6794 lumens / B1-U0-G1
Type III - 3000K: 6459 lumens / B2-U0-G1
Type IV - 3000K: 6078 lumens / B1-U0-G1
Type II - 4000K: 7377 lumens / B2-U0-G1
Type III - 4000K: 7013 lumens / B2-U0-G1
Type IV - 4000K: 6599 lumens / B1-U0-G2
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Optional 0-10v DC dimming is available on request.
LN800 LUMINAIRE WEIGHT: 26 lbs
LN800 LUMINAIRE EPA: 1.6 sq. ft
LN450 LUMINAIRE WEIGHT: 22 lbs
LN450 LUMINAIRE EPA: 1.3 sq. ft
Straight rectangular pole is 6.3" x 4.7" nominal and manufactured from cold drawn over mandrel, electric-weld, mechanical rectangular steel tubing with nominal wall thickness of 0.197''. Sides of shaft are flat with 1/2" radius corners. Pole shall show no seam along shaft. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 26' with lower pedestrian luminaire mounted at 15'.
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.