Luminaire consists of base, lens with decorative ring assembly, and secondary reflector with support struts. Decorative ring assembly surrounding lens is secured to the base with socket head cap screws and consists of aluminum rings separated by spacers. Simple cast aluminum luminaire base with integral slip fitter anchors three cast aluminum indirect reflector support struts with socket head cap screws and provides mounting surface for the optical assembly. Borosilicate glass lens has clear top with etched sidewalls and is sealed by compression to the luminaire base with single piece closed cell rubber gasket when the decorative ring assembly is installed. Top ring of assembly is separated from the glass lens with single piece ''D'' profile silicone gasket to prevent glass to metal contact. Spun aluminum indirect reflector is finished in high-reflectance white paint. Luminaire slip fits pole top tenon and has built-in stop to limit insertion depth to 4.5''. Slip fitter and pole shall have matching diameters to provide a smooth transition to the luminaire. Two offset rows of three 8mm recessed setscrews secure the luminaire to the pole. All hardware is stainless steel.
Single COB LED is positioned within polycarbonate reflector producing a 40° beam. The reflector with specular metallic finish, protected by clear coat, projects light upward through the clear borosilicate top lens onto the secondary reflector, providing a symmetrical Type V distribution. Etched sidewall on lens provides a subtle radiant glow for accenting. Secondary reflector is finished with white powder coat finish on the underside for increased efficiency.
Electronic LED driver 1050mA drive current to the CoB LED. Universal driver accepts input voltage range from 120v to 277v at 50/60Hz. Power consumption is 41 watts. Power factor is greater than 0.95. Optional 0-10v dimming available on request.
DELIVERED LUMENS / BUG RATING
3000K: 2201 lumens / B1-U3-G1
4000K: 2305 lumens / B1-U3-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE WEIGHT: 15 LBS
LUMINAIRE EPA: 1.7 SQ FT
POLE WEIGHT: 65 LBS (Aluminum)
Stepped steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.142''. Pole shall show no seam along shaft. Decorative ring between upper and lower shaft is secured with three recessed setscrews. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080'' spun aluminum and finished to match the pole. Nominal pole height is 13'.
Contact factory for aluminum pole.
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
CERTIFICATION: CSA/US Certified for Wet Locations
INGRESS PROTECTION: IP54
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.