LEDIA LL RGB ID
Select your desired model variant
LEDIA LL ID model for interior recessed in-floor use features leveling adjustment allowing installation to be flush with floor surface. It is available in four lengths. Luminaire assembly may be adjusted for depths from 2.4" to 5.5". Color-changing RGB LEDs require remote 12v DC LED driver and 3-channel dimmer or sequencer. Contact factory for in-wall models.
Specification
LEDIA LL ID 36 RGB
HOUSING
Machined tempered glass lens is 0.47'' thick and bonded to the zinc plated steel luminaire housing providing a sealed enclosure. Exterior surface of lens is polished with chamfered edges. Underside of lens is diffused. LED light engine housing is constructed of stainless steel. All internal components are sealed to prevent moisture entry. Luminaire mounts onto adjustable luminaire supports consisting of stainless steel threaded rods and leveling pads secured to zinc plated steel mounting plate. Two luminaire supports are adjustable to allow overall height range of 2.4" to 5.5" to compensate for floor thickness. Luminaire is supplied with removable extruded aluminum form for rough-in installation. Recessed mounting plates and removable form may be preshipped upon request. Ingress Protection: IP67.
OPTICS
Low wattage LED's provide even illumination across the entire lens surface.
ELECTRICAL
Remote 60w power supply is sold separately and may be used to power multiple luminaires. LED power supply requires 120v input and provides 12v DC to luminaire. Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be UL Listed direct burial cable with minimum 18 AWG wire supplied by others. Optional 3 channel dimming module and RGB color sequencers, suitable for dry locations, are available and require a 0-10v DC voltage controller (by others).
LAMPING
Maximum power consumption is 16 watts.
NOTE : Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.
WARRANTY
Limited product warranty period including the LEDs is five years. LED power supply and optional control modules (ordered separately) shall carry the respective manufacturer's limited warranty.
Machined tempered glass lens is 0.47'' thick and bonded to the zinc plated steel luminaire housing providing a sealed enclosure. Exterior surface of lens is polished with chamfered edges. Underside of lens is diffused. LED light engine housing is constructed of stainless steel. All internal components are sealed to prevent moisture entry. Luminaire mounts onto adjustable luminaire supports consisting of stainless steel threaded rods and leveling pads secured to zinc plated steel mounting plate. Two luminaire supports are adjustable to allow overall height range of 2.4" to 5.5" to compensate for floor thickness. Luminaire is supplied with removable extruded aluminum form for rough-in installation. Recessed mounting plates and removable form may be preshipped upon request. Ingress Protection: IP67.
OPTICS
Low wattage LED's provide even illumination across the entire lens surface.
ELECTRICAL
Remote 60w power supply is sold separately and may be used to power multiple luminaires. LED power supply requires 120v input and provides 12v DC to luminaire. Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be UL Listed direct burial cable with minimum 18 AWG wire supplied by others. Optional 3 channel dimming module and RGB color sequencers, suitable for dry locations, are available and require a 0-10v DC voltage controller (by others).
LAMPING
Maximum power consumption is 16 watts.
NOTE : Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.
WARRANTY
Limited product warranty period including the LEDs is five years. LED power supply and optional control modules (ordered separately) shall carry the respective manufacturer's limited warranty.
Documents
Catalogue page | Hessamerica_LEDIA_LL_ID.pdf (PDF, 176.71 KB) |
Drawings | ledia_ll_id_usa.png (PNG, 3.64 KB) |
Product brief |
IES / Image
Product images | LEDIA_LL_RGB_ID.zip |