LEDIA LL OUTDOOR
Elegant in any context, LEDIA LL OD is ideally suited to a variety of recessed inground applications. It is available in four lengths. Frameless glass lens integrates subtly into pavers or concrete walkways to highlight or act as directional identifiers. The tempered glass lens, coated internally with a translucent white coating, is bonded to the stainless steel housing providing a sealed enclosure. LEDIA mounts into a recessed stainless steel subframe, which serves as a cable vault for making power connections. Remote 12v DC LED driver is required. LED colors; red, blue, green, amber, white.
Specification
LEDIA LL OD 36
HOUSING
Machined tempered glass lens is 0.75'' thick and bonded to the stainless steel luminaire housing providing a sealed enclosure. Exterior surface of lens is polished with chamfered edges. Underside of lens is diffused. LED light engine housing is constructed of stainless steel. All internal components are sealed to prevent moisture entry. Luminaire mounts into stainless steel sub-frame where electrical connections are made. Luminaire is supplied with removable extruded aluminum form for rough-in installation. Recessed frame and removable form may be pre-shipped upon request.
OPTICS
Low wattage LED's provide even illumination across the entire lens surface.
DELIVERED LUMENS
3000K: 22 lumens
6500K: 26 lumens
BUG RATING
3000K: B0-U2-G0
6500K: B0-U2-G0
ELECTRICAL
Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25°C(-13°F) and maximum ambient rating of 38°C (100°F).
Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional dimming module, suitable for dry locations, is available and requires a 10v DC voltage controller (by others).
LAMPING
Total power consumption is 10 watts. Colors are available in red, blue, green, amber, warm white (3000K), and cool white (6500K)
NOTE : Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.
CERTIFICATION
UL Listed for Wet Locations. Ingress Protection: IP67.
WEIGHT: 13 lbs
WARRANTY
Limited product warranty period including the LEDs is five years. Driver and optional dimming module shall carry the manufacturer's limited warranty.
Machined tempered glass lens is 0.75'' thick and bonded to the stainless steel luminaire housing providing a sealed enclosure. Exterior surface of lens is polished with chamfered edges. Underside of lens is diffused. LED light engine housing is constructed of stainless steel. All internal components are sealed to prevent moisture entry. Luminaire mounts into stainless steel sub-frame where electrical connections are made. Luminaire is supplied with removable extruded aluminum form for rough-in installation. Recessed frame and removable form may be pre-shipped upon request.
OPTICS
Low wattage LED's provide even illumination across the entire lens surface.
DELIVERED LUMENS
3000K: 22 lumens
6500K: 26 lumens
BUG RATING
3000K: B0-U2-G0
6500K: B0-U2-G0
ELECTRICAL
Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25°C(-13°F) and maximum ambient rating of 38°C (100°F).
Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional dimming module, suitable for dry locations, is available and requires a 10v DC voltage controller (by others).
LAMPING
Total power consumption is 10 watts. Colors are available in red, blue, green, amber, warm white (3000K), and cool white (6500K)
NOTE : Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.
CERTIFICATION
UL Listed for Wet Locations. Ingress Protection: IP67.
WEIGHT: 13 lbs
WARRANTY
Limited product warranty period including the LEDs is five years. Driver and optional dimming module shall carry the manufacturer's limited warranty.
Documents
Catalogue page | Hessamerica_LEDIA_LL_OD.pdf (PDF, 156.96 KB) |
Drawings | ledia_ll_od_usa.png (PNG, 2.37 KB) |
Product brief |
IES / Image
Photometric reports | LEDIA_LL_09_|_white_6500.ies (BIN, 3.11 KB) LEDIA_LL_18_|_white_6500.ies (BIN, 3.11 KB) LEDIA_LL_27_|_white_6500.ies (BIN, 3.11 KB) LEDIA_LL_36_|_white_6500.ies (BIN, 3.11 KB) |
Product images | LEDIA_LL_OUTDOOR.zip |