LEDIA LF RGB WALL
References
Select your desired model variant
LEDIA LF W 04 RGB
LEDIA LF W 08 RGB
LEDIA LF W 12 RGB
LEDIA LF W 16 RGB
LED Recessed Wall Luminaire adds definition to interior and exterior spaces by creating colorful architectural accents. The flush mounted glass squares are available in four sizes with a choice of plain or block patterned lenses. Specially treated tempered glass lens diffuses light evenly across the surface. Trim frame is brushed stainless steel. Luminaire mounts into recessed stainless steel back-box. LED color-changing RGB.
Specification
LEDIA LF W 04 RGB
HOUSING
Luminaire consists of 0.40'' thick tempered glass lens bonded to the zinc plated steel housing providing a sealed enclosure. Brushed stainless steel trim is 1" wide and affixed to the luminaire with concealed hardware. Exterior lens surface is available in a choice of plain treatment or textured square pattern with matching screen print on the underside. Underside of lens is sandblasted on both styles. LED light engine housing is constructed of zinc plated steel with special diffuser. All internal components are sealed to prevent moisture entry. Luminaire mounts into recessed stainless steel wall box and is secured with two tamper-proof countersunk screws for a flush appearance. Recessed wall box may be preshipped upon request. Ingress Protection: IP67
OPTICS
Low wattage LED's provide even illumination across the entire lens surface.
ELECTRICAL
Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25°C(-13°F) and maximum ambient rating of 38°C (100°F).
Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional 3 channel dimming module and RGB color sequencer, suitable for dry locations, are available and require a 0-10v DC voltage controller (by others).
LAMPING
Maximum power consumption is 5 watts.
NOTE : Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.
WARRANTY
Limited product warranty period including the LEDs is five years. LED power supply (ordered separately), optional 3- channel dimmer, and optional RGB color sequencer shall carry the respective manufacturer's limited warranty.
Luminaire consists of 0.40'' thick tempered glass lens bonded to the zinc plated steel housing providing a sealed enclosure. Brushed stainless steel trim is 1" wide and affixed to the luminaire with concealed hardware. Exterior lens surface is available in a choice of plain treatment or textured square pattern with matching screen print on the underside. Underside of lens is sandblasted on both styles. LED light engine housing is constructed of zinc plated steel with special diffuser. All internal components are sealed to prevent moisture entry. Luminaire mounts into recessed stainless steel wall box and is secured with two tamper-proof countersunk screws for a flush appearance. Recessed wall box may be preshipped upon request. Ingress Protection: IP67
OPTICS
Low wattage LED's provide even illumination across the entire lens surface.
ELECTRICAL
Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25°C(-13°F) and maximum ambient rating of 38°C (100°F).
Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional 3 channel dimming module and RGB color sequencer, suitable for dry locations, are available and require a 0-10v DC voltage controller (by others).
LAMPING
Maximum power consumption is 5 watts.
NOTE : Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.
WARRANTY
Limited product warranty period including the LEDs is five years. LED power supply (ordered separately), optional 3- channel dimmer, and optional RGB color sequencer shall carry the respective manufacturer's limited warranty.
Documents
| Catalogue page | Hessamerica_LEDIA_LF_W.pdf (PDF, 137.82 KB) |
| Drawings | ledia_lf_w_usa.png (PNG, 2.17 KB) |
| Product brief |
IES / Image
| Product images | LEDIA_LF_RGB_WALL.zip |
