Round luminaire housing is fabricated from stainless steel and shows no visible welds. Housing is finished in matte black powder coat paint. Tempered glass lens with screen printing is bonded to the housing for a weather tight seal. Access plate with gasketing is secured to bottom of luminaire with threaded fasteners to allow entry into the housing for servicing as needed. Housing is prewired with power cable and weather-tight strain relief bushing, eliminating the need to access the luminaire during installation. Luminaire installs into recessed stainless installation housing. All hardware is stainless steel.
Two reflectors direct light upward from individual high power LEDs for uplighting. The reflectors are facetted for improved visual comfort and uniform illumination. Optics are available is spot distribution with 7° beam angle or medium distribution with 26° beam angle.
Electronic LED driver supplies 350mA drive current to two individual LEDs and has an input voltage range from 120v to 277v at 50/60Hz. Total power consumption is 10 watts.
LED DELIVERED LUMEN OUTPUT*
Spot 7° Beam:
Medium 26° Beam:
* Lumen output is same for 3000K and 4000K color temperatures.
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE WEIGHT: 16 lbs
Luminaire installs into stainless steel recessed housing. Recessed housing with dummy cover may be pre-shipped in advance on request.
Standard finish is finely textured matte black.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.