Luminaire base is cast aluminum and is secured to pole top with concealed hardware. Clear acrylic cylindrical lens with bonded aluminum top is secured to the housing with single stainless steel cap screw. Satin anodized rings encircle the LED module at the top of the lens compartment as a decorative element. Lens is sealed to the housing with silicone gasketing.
Optical assembly consists of one LEVO C LED module mounted within the cylindrical clear acrylic lens. The module consists of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, IV, or V optics. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades. CRI is 80+.
Electronic LED driver supplies 700mA drive current to the LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 37 watts. Optional 0-10v DC dimming is available on request.
DELIVERED LUMEN OUTPUT / BUG RATING
Type 2 = 3248 lumens / B1-U1-G1
Type 3 = 3356 lumens / B1-U2-G1
Type 4 = 3261 lumens / B1-U1-G1
Type 5 = 3542 lumens / B2-U1-G1
Type 2 = 3456 lumens / B1-U1-G1
Type 3 = 3571 lumens / B1-U2-G1
Type 4 = 3469 lumens / B1-U1-G1
Type 5 = 3768 lumens / B2-U1-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Aluminum column is manufactured from seamless 6061 aluminum tubing with nominal wall thickness of 0.196'' and is heat treated to produce a T6 temper. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Standard mounting is with internal flange and anchor bolts. Optional external flange with anchor bolts and base cover available on request. One-piece base cover is 0.080'' spun aluminum and finished to match the pole. Nominal column height is 14.5'
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
Limited product warranty period including the LEDs is five years. LED driver shall carry the manufacturer limited warranty.