Housing consists of cylindrical matte acrylic lens retained by two lens rings mechanically fastened together with three internal aluminum support rods. Lens rings are precision-machined from 6082 billet aluminum, then satin anodized. Lens rings have machined groove for one-piece EPDM gasket to provide a weather-tight seal to the lens. Outer lens ring has circular aperture for diffused end lens. Tempered glass end lens is white flashed opal glass, sealed to the lens ring with one-piece closed cell silicone gasket. Luminaire mounts to bollard shaft with three concealed socket head cap screws. All hardware is stainless steel.
LED light engine consists of a single CoB diode centered within the cylindrical matte acrylic lens to direct light upward and outward to produce a Type V distribution.
Electronic LED driver with input voltage range from 120v to 277v at 50/60Hz supplies 350mA drive current to the LED module. Total power consumption is 14 watts.
DELIVERED LUMENS / BUG RATING
3000K: 1050 lumens / B0-U4-G1
4000K: 1084 lumens / B0-U4-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for more current technical data.
Bollard mounts to anchor base plate assembly with three M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of three 1/2'' x 15'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
Standard luminaire finish is satin anodized aluminum. Standard finishes for bollard shaft are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
WEIGHT: 18 lbs
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.