Rectangular shaft is fabricated from 6061 aluminum extrusions and aluminum sheet. Hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Machined aluminum top cap provides access to CoB LED and reflector located at the top of the bollard. Top cap is secured to bollard with four captive stainless steel socket head cap screws and is sealed to the housing with one-piece die-cut silicone gasket. Square lenses on main width of the bollard and narrow rectilinear lenses on adjacent sides are matte acrylic with textured finish. Lenses are gasketed to provide a weather-tight seal to the housing. Nominal bollard height is 43" with a cross section of 11.6" x 4.9".
Top mounted CoB LED and medium beam reflector projects light downward and outward through four lenses on the bollard. Interior of housing is painted white to provide even illumination through all four lenses. Two square lenses provide accenting, while two rectilinear lenses provide primary illumination.
Electronic LED driver supplies 620mA drive current to LED modules with input voltage range from 120v to 277v at 50/60Hz. Total power consumption is 24 watts. 0-10v dimming available on request. Electronic driver is housed within a weatherproof enclosure that is accessed via the hand hole.
DELIVERED LUMENS / bug rating
3000K: 1495 lumens / B1-U4-G1
4000K: 1854 lumens / B1-U4-G2
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Luminaire with internal flange mounts to four 0.5" diameter x 15" x 3" galvanized steel anchor bolts embedded into concrete foundation provided by others.
Optional external flange model installs onto hot-dip galvanized steel mounting plate with four 0.5" diameter x15"x3" galvanized steel anchor bolts embedded as an assembly into a concrete foundation (by others). Anchor bolts may be pre-shipped in advance.
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the respective manufacturer's limited warranty.