PARMA
The precision-machined housing and reflector shade of high-grade aluminum are satin anodized. The translucent matte acrylic lens provides diffused illumination. Inverted tapered bollard shaft of cast aluminum is finished in finely textured paint. Bollard is secured to ground mounting assembly with stainless steel socket head cap screws. All hardware is stainless steel.
Specification
PARMA
HOUSING
One-piece luminaire base and top are precision-machined from 6060 billet aluminum, then satin anodized. Conical matte acrylic lens is mechanically secured to the base with retaining ring and two concealed socket head cap screws. One-piece neoprene gasketing provides a weather-tight seal. Luminaire base fastens to the one-piece cast aluminum tapered housing with three recessed setscrews and is sealed with one-piece closed cell silicone gasket. Electronic ballast mounts to plate on the underside of the base and is housed in the top of the housing. All hardware is stainless steel.
OPTICS
Vertical, base down lamp is positioned within the cylindrical matte acrylic lens producing symmetrical distribution.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
LAMPING / BUG RATING
26w PL-C - CFQ26W/G24q/835 - B1-U3-G1
32w PL-T - CFTR32W/GX24q/835 - B1-U3-G1
42w PL-T - CFTR42W/GX24q/835 - B1-U3-G2
MOUNTING
Inverted tapered bollard shaft with integral flange plate is cast aluminum with nominal wall thickness of 0.24''. Bollard shaft mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws. Anchor base assembly consists of four 3/8'' x 10'' x 1-1/2'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others). See pole data sheet for mounting details.
FINISH
Housing is satin anodized aluminum. Standard finishes for bollard shaft are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and transformer shall carry the manufacturer's limited warranty.
One-piece luminaire base and top are precision-machined from 6060 billet aluminum, then satin anodized. Conical matte acrylic lens is mechanically secured to the base with retaining ring and two concealed socket head cap screws. One-piece neoprene gasketing provides a weather-tight seal. Luminaire base fastens to the one-piece cast aluminum tapered housing with three recessed setscrews and is sealed with one-piece closed cell silicone gasket. Electronic ballast mounts to plate on the underside of the base and is housed in the top of the housing. All hardware is stainless steel.
OPTICS
Vertical, base down lamp is positioned within the cylindrical matte acrylic lens producing symmetrical distribution.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
LAMPING / BUG RATING
26w PL-C - CFQ26W/G24q/835 - B1-U3-G1
32w PL-T - CFTR32W/GX24q/835 - B1-U3-G1
42w PL-T - CFTR42W/GX24q/835 - B1-U3-G2
MOUNTING
Inverted tapered bollard shaft with integral flange plate is cast aluminum with nominal wall thickness of 0.24''. Bollard shaft mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws. Anchor base assembly consists of four 3/8'' x 10'' x 1-1/2'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others). See pole data sheet for mounting details.
FINISH
Housing is satin anodized aluminum. Standard finishes for bollard shaft are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and transformer shall carry the manufacturer's limited warranty.
Documents
Catalogue page | Hessamerica_PARMA_ib.pdf (PDF, 154.28 KB) |
Drawings | Parma_PM940.png (PNG, 2.37 KB) |
Product brief |
IES / Image
Photometric reports | PM940_|_26W_CFL.ies (BIN, 413 Byte) PM940_|_32W_CFL.ies (BIN, 413 Byte) PM940_|_42W_CFL.ies (BIN, 413 Byte) |
Mounting detail |
hessamerica_mounting_details_template_3.png (PNG, 76.15 KB) |
Product images | PARMA.zip |