Cylindrical housing is fabricated from 6060 aluminum and mechanically fastened to fabricated aluminum bollard shaft with concave profile. Flat lens is clear acrylic. All hardware is stainless steel.
LED light engine with electrical disconnect is to flush mounted to the aluminum plate inside the housing. Six LEDs with individual refractive lenses are positioned within the cylindrical housing providing asymmetric distribution with zero uplight.
Input voltage to universal high power factor LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LEDs is 350 mA.
LED DATA / SYSTEM WATTS / DELIVERED LUMENS / BUG RATING
Power Consumption:8 watts
3000K: 129 lumens / B0-U1-G0
4000K: 155 lumens / B0-U1-G0
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Flange mounted bollard mounts to anchor base plate assembly with stainless steel socket head cap screws and washers. Anchor base assembly consists of four hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.