Single piece bollard consisting of luminaire head and shaft is fabricated from 6061 aluminum extrusion showing no visible welds. Nominal wall thickness is 0.125" with rectangular cross-section of 6" x 2". LED light engine and driver are housed within a self-contained power pack installed in the bollard head and is removable with a single tamper-proof fastener. The amber LED light engine is thermally managed using convection and heat transfer through the use of an aluminum heat sink and the luminaire housing. Lens is clear impact-resistant acrylic with anti-reflective coating for increased efficiency. Bollard is available in single or twin mount configurations in overall heights of 36". All hardware is stainless steel.
LED light engine consists of three multi-chip amber LED arrays fitted with prismatic lens optics to produce a uniform Type IV forward throw light distribution pattern suitable for pathways and sidewalks. Luminaire emits zero uplight at or above 90 degrees horizontal and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. LEDs are true amber with dominant wavelength of 590-595 nanometers and no light below 560 nanometers.
Integral LED driver is housed in luminaire head and consumes 8 watts at 350 mA. Input voltage range is 120v - 277v AC, 50-60 Hz. High power factor LED driver shall be UL recognized.
LED DELIVERED LUMENS / BUG RATING
Standard model: 254 lumens / B0-U1-G1
With beach-side shield: 214 lumens / B0-U1-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for more current technical data.
Flangeless bollard shaft slips over an integral tenon on the installation plate and is secured with stainless steel tamper-proof hardware to provide a stable mounting platform for the luminaire. Hardware for the installation plate includes hex nuts and washers for leveling and fastening, as well as three 1/2" hot-dip galvanized anchor bolts for embedment into a concrete foundation provided by others.
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
CSA/US Certified for Wet Locations.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty. Specifications are subject to change without notification.