Two 6060 aluminum alloy sidewalls attach to opposite sides of the square cast aluminum base with concealed hardware. Sidewalls are 0.60'' thick and have two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic cubic lens with integral flange has two white acrylic panels bonded to the outer surface to align the lens assembly to the luminaire. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. Luminaire mounts to 0.197'' thick wall extruded square aluminum shaft with two concealed socket head cap screws. All hardware is stainless steel.
Single COB LED directs light upward through matte acrylic lens producing soft diffused illumination.
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LED is 450 mA for 16 watt model and 620 mA for 24 watt model.
LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
Standard Output:16 watts
3000K: 597 lumens / B0-U3-G1
4000K: 643 lumens / B0-U4-G1
High Output: 24 watts
3000K: 849 lumens / B0-U4-G1
4000K: 1057 lumens / B0-U4-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Bollard mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of four1/2'' x 17'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
WEIGHT: 17 lbs
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
Limited product warranty period including the LEDs is five years. Driver shall carry the respective manufacturer's limited warranty.