Bollard shaft is extruded from 6061-T6 aluminum with nominal diameter of 7.1" and wall thickness of 0.28". Luminaire consists of upper housing element and cylindrical lens bonded to the bollard shaft. Cylindrical lens is clear acrylic with thickness of 0.16". Optical and electrical unit with machined aluminum cap installs into the luminaire from the top. The removable assembly is secured with a single stainless steel thumbscrew concealed within the bollard shaft and accessed via the hand hole. Single piece silicone gasket provides weather-tight seal when installed. Electrical quick disconnect facilitates ease of maintenance when removing or replacing the assembly. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Machined aluminum flange plate is 1/2" thick and welded to the shaft. Bollard is available in 3', 3.5', and 4' heights. All hardware is stainless steel.
Optical assembly consists of one LEVO C LED module mounted within the cylindrical clear acrylic lens. The module consists of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, IV, or V optics. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades. CRI is 80+.
Electronic LED driver supplies 250mA drive current to the LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 15 watts. Optional 0-10v DC dimming is available on request.
DELIVERED LUMEN OUTPUT / BUG RATING
Type 2 = 1299 lumens / B0-U1-G0
Type 3 = 1342 lumens / B1-U1-G1
Type 4 = 1304 lumens / B1-U1-G1
Type 5 = 1417 lumens / B1-U1-G0
Type 2 = 1382 lumens / B1-U1-G1
Type 3 = 1428 lumens / B1-U2-G1
Type 4 = 1388 lumens / B1-U1-G1
Type 5 = 1507 lumens / B1-U1-G0
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Bollard with external flange mounts installs onto four 1/2" x 15" x 3" galvanized steel anchors embedded into concrete foundation (by others). Base cover is fabricated from 0.080" spun aluminum and finished to match luminaire. Anchor bolts may be pre-shipped in advance on request.
Internal flange mount installs onto four 1/2" x 15" x 3" galvanized steel anchors embedded into concrete foundation (by others). Anchor bolts may be pre-shipped in advance on request.
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.
CSA Certified for Wet Locations