One-piece cylindrical luminaire housing with integral cooling grooves and separate lens ring are precision-machined from 6082 billet aluminum alloy, then satin anodized. Lens ring fits flush to the housing and is sealed with one-piece closed cell silicone gasket. Borosilicate lens threads into the lens ring and is sealed with one-piece closed cell silicone gasket. Spun aluminum shade with anodized finish is supported by four formed aluminum struts welded to an attachment ring. Shade assembly mounts to the luminaire housing and is secured with four recessed setscrews. Housing fastens to the one-piece cast aluminum inverted taper bollard shaft with three recessed setscrews and sealed with one-piece closed cell silicone gasket. LED driver mount to plate on the underside of the housing and housed in the top of the shaft when the luminaire is installed. All hardware is stainless steel.
CoB LED with high efficiency white reflector with wide beam distribution projects light upward through the semi-spherical matte borosilicate glass lens. The external lens has matte inner surface to diffuse and direct light onto the satin-anodized spun aluminum reflector. The light engine is available in a choice of 3000K or 4000K color temperatures with a CRI greater than 80.
High power factor electronic LED driver accepts 120v through 277v input at 50/60 Hz. The universal driver supplies 700mA drive current to the CoB LED and consumes 26 watts. Optional 0-10v DC dimming available on request.
DELIVERED LUMENS / BUG RATING
3000k: 722 lumens / B0-U3-G1
4000k: 906 lumens / B0-U3-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Inverted tapered bollard shaft with integral flange plate is cast aluminum with nominal wall thickness of 0.24". Bollard shaft mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws. Anchor base assembly consists of four 3/8" x 10" x 1-1/2" hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
WEIGHT: 10 lbs
Housing is satin anodized aluminum. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
CSA/US Certified for Wet Locations
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.