BARI Y
Possible configurations
References
Select your desired model variant
BARI 220 Y LED
Precision machined cooling grooves and natural aluminum finish make the BARI family a perfect accent to contemporary architecture. While smaller models are well suited for accent lighting of more intimate spaces, the large scale of the 220 with its metal halide lamp is ideal for large spaces with higher ceiling heights. Housing is machined from billet aluminum, then natural anodized. Standard housing has matching trim ring. Canopy and stem are also natural anodized. Yoke and hardware are stainless steel. Optional matte tempered glass lens is available to conceal lamp and diffuse illumination.
Specification
BARI 220 Y LED
HOUSING
Luminaire housing, lens ring, and canopy are precision machined from 6082 aluminum, then satin anodized. Housing with integral cooling grooves is machined inside and out from 1.2'' wall aluminum tubing. Lens ring with gasketed tempered glass lens fits flush to the housing, and is secured with three recessed setscrews. Luminaire is attached to stainless steel yoke with precision-machined aluminum adjustment knobs, satin anodized to match luminaire and canopy. Nickel-plated knurled strain reliefs support exposed cable between the luminaire and yoke. Canopy mounts to the ceiling with factory-supplied hardware and anchors over 3.5'' or 4'' octagon box. All hardware is stainless steel.
OPTICS
Optics include single CoB LED with reflector and diffusing lens. Available distributions include Spot 13°, Medium 27°, and Wide 59° beam spreads. Optional matte glass disc or metal disk adds diffusing element and is offset 1'' from the lens ring with spacers and stainless steel socket head cap screws.
DELIVERED LUMENS / CRI = 80
3000K
13° beam - 2914 lumens
27° beam - 2796 lumens
59° beam - 2720 lumens
4000K
13° beam - 3108 lumens
27° beam - 2985 lumens
59° beam - 2902 lumens
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 25 watts. Optional 0-10v DC dimming is available on request.
FINISH
Standard finish is satin anodized aluminum.
CERTIFICATION
UL Listed for Damp Locations
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Luminaire housing, lens ring, and canopy are precision machined from 6082 aluminum, then satin anodized. Housing with integral cooling grooves is machined inside and out from 1.2'' wall aluminum tubing. Lens ring with gasketed tempered glass lens fits flush to the housing, and is secured with three recessed setscrews. Luminaire is attached to stainless steel yoke with precision-machined aluminum adjustment knobs, satin anodized to match luminaire and canopy. Nickel-plated knurled strain reliefs support exposed cable between the luminaire and yoke. Canopy mounts to the ceiling with factory-supplied hardware and anchors over 3.5'' or 4'' octagon box. All hardware is stainless steel.
OPTICS
Optics include single CoB LED with reflector and diffusing lens. Available distributions include Spot 13°, Medium 27°, and Wide 59° beam spreads. Optional matte glass disc or metal disk adds diffusing element and is offset 1'' from the lens ring with spacers and stainless steel socket head cap screws.
DELIVERED LUMENS / CRI = 80
3000K
13° beam - 2914 lumens
27° beam - 2796 lumens
59° beam - 2720 lumens
4000K
13° beam - 3108 lumens
27° beam - 2985 lumens
59° beam - 2902 lumens
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 25 watts. Optional 0-10v DC dimming is available on request.
FINISH
Standard finish is satin anodized aluminum.
CERTIFICATION
UL Listed for Damp Locations
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Documents
| Catalogue page | Hessamerica_BARI_220_Y.pdf (PDF, 1.32 MB) |
| Drawings | Bari_220_Y_BR220Y_usa.png (PNG, 6.19 KB) |
| Product brief |
IES / Image
| Photometric reports | BR220-LED-MB-3000K.ies (BIN, 1.02 KB) BR220-LED-MB-4000K.ies (BIN, 1.02 KB) BR220-LED-SP-3000K.ies (BIN, 1.05 KB) BR220-LED-SP-4000K.ies (BIN, 1.05 KB) BR220-LED-WB-3000K.ies (BIN, 1.08 KB) BR220-LED-WB-4000K.ies (BIN, 1.08 KB) |
| Product images | BARI_Y.zip |
