VAREDO
Select your desired model variant
VAREDO 410
The VAREDO catenary suspended luminaire expands design possibilities for architectural settings where installation of poles is not possible or desired. The softly contoured cast aluminum luminaire features a low profile, allowing it to blend into the surrounding architecture. Frameless tempered glass lens with single quarter turn fastener allows tool-less access to the optical compartment. The LED source is fully shielded and emits zero uplight. It is suitable for all LEED lighting zones and is Dark Sky compliant. Complementary pole mounted luminaires in two mounting configurations add flexibility and design continuity when combined with catenary suspended luminaires for a complete site lighting solution. Structural design, stainless steel catenary cable, and fittings for mounting to support structures are provided by others. All hardware is stainless steel. Standard colors; matte silver grey metallic, dark grey, or graphite grey. Special colors available. CSA certified for Wet Locations.
Specification
VAREDO 410
HOUSING
Luminaire housing is cast aluminum. Frameless tempered glass lens is hinged and secured with single stainless steel quarter-turn fastener for tool-less access to the optical compartment. Lens seals to the housing with one-piece silicone gasketing when closed. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. All hardware is stainless steel.
OPTICS
Optics include choice of two or three LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distribution is Type V. Contact factory of asymmetric distributions. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones.
LED DELIVERED LUMEN OUTPUT / BUG RATING
2 Modules: 72 watts
Type V - 3000K: 5046 lumens / B2-U0-G1
Type V - 4000K: 5374 lumens / B3-U0-G1
3 Modules: 108 watts
Type V - 3000K: 7568 lumens / B3-U0-G1
Type V - 4000K: 8060 lumens / B3-U0-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Optional 0-10v DC dimming is available on request.
WEIGHT: 40 lbs
EPA: 1.1 SQ FT
MOUNTING
Cable hanger assembly consists of two stainless steel clamps with vertical adjustment capability to mount and level the luminaire. Clamp positions permit parallel or perpendicular alignment of connecting rods to the catenary cable. (Structural design, stainless steel catenary cable, cable fittings, and fittings for mounting to support structure provided by others.) Luminaire installs onto 1/4" through 1/2" diameter cable.
FINISH
Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Luminaire housing is cast aluminum. Frameless tempered glass lens is hinged and secured with single stainless steel quarter-turn fastener for tool-less access to the optical compartment. Lens seals to the housing with one-piece silicone gasketing when closed. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. All hardware is stainless steel.
OPTICS
Optics include choice of two or three LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distribution is Type V. Contact factory of asymmetric distributions. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones.
LED DELIVERED LUMEN OUTPUT / BUG RATING
2 Modules: 72 watts
Type V - 3000K: 5046 lumens / B2-U0-G1
Type V - 4000K: 5374 lumens / B3-U0-G1
3 Modules: 108 watts
Type V - 3000K: 7568 lumens / B3-U0-G1
Type V - 4000K: 8060 lumens / B3-U0-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Optional 0-10v DC dimming is available on request.
WEIGHT: 40 lbs
EPA: 1.1 SQ FT
MOUNTING
Cable hanger assembly consists of two stainless steel clamps with vertical adjustment capability to mount and level the luminaire. Clamp positions permit parallel or perpendicular alignment of connecting rods to the catenary cable. (Structural design, stainless steel catenary cable, cable fittings, and fittings for mounting to support structure provided by others.) Luminaire installs onto 1/4" through 1/2" diameter cable.
FINISH
Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Documents
| Catalogue page | Hessamerica_VAREDO_CSL.pdf (PDF, 173.82 KB) |
| Drawings | Varedo_UE_usa.png (PNG, 70.86 KB) |
| Product brief |
IES / Image
| Photometric reports | VR410-2LVC-NW-T5.ies (BIN, 16.95 KB) VR410-2LVC-WW-T5.ies (BIN, 16.95 KB) VR410-3LVC-NW-T5.ies (BIN, 16.95 KB) VR410-3LVC-WW-T5.ies (BIN, 16.95 KB) |
| Product images | VAREDO.zip |
Corresponding products
Barrier Bollard
VAREDO
VAREDO
Benches
VAREDO
VAREDO
Bicycle Racks
VAREDO
VAREDO
Litter Receptacles
VAREDO
VAREDO
