Ringed cage is fabricated from high strength 6061 aluminum alloy. Clear acrylic cylindrical lens assembly twists onto mounting plate at the bottom of the cage assembly and is secured with three socket head cap screws. Lens is sealed with one-piece silicone gasket. Power cable is sealed with weather-tight bushing. All hardware is stainless steel.
Optics are comprised of one individual LED module consisting of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. The prismatic lens redirects light output from the individual LEDs and is available in an asymmetric Type II or Type III distribution, or a symmetric Type V distribution. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v to 277v at 50/60Hz. Power consumption is 37 watts. 0-10v dimming and through-wire capabilities are available on request.
LED DELIVERED LUMEN OUTPUT / BUG RATING (Final results pending - contact factory)
3000K - 3800 lumens
4000K - 4000 lumens
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Fabricated bracket assembly mounts over 3.5" or 4" octagon box and is secured to the wall in four places. Mounting bracket is finished in finely textured paint to match luminaire. Bracket assembly ships pre-wired with fish tape for ease of installation.
WEIGHT: 40 lbs
EPA: 3.1 sq ft
Standard finish is finely textured dark grey, graphite grey, or matte silver grey metallic. Special colors available on request.
INGRESS PROTECTION: IP54
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.