Select your desired model variant
Design simplicity and precision machining distinguish the TRENTO. Housing is constructed of high grade billet aluminum with satin anodized finish. Translucent acrylic lens creates a soft ambiance, while the matte acrylic end lens adds a contrasting lighting element. All hardware is stainless steel. Luminaire may be mounted to wall or ceiling.
Housing consists of cylindrical matte acrylic lens retained by two lens rings mechanically fastened together with three internal aluminum support rods. Lens rings are precision-machined from 6082 billet aluminum, then satin anodized. Lens rings have machined groove for one-piece EPDM gasket to provide a weather-tight seal to the lens. Outer lens ring has circular aperture for diffused end lens. Tempered glass end lens is white flashed opal glass, sealed to the lens ring with one-piece closed cell silicone gasket. Luminaire mounts to machined aluminum back plate housing the lamp and electrical components with three recessed setscrews. Back plate is satin anodized to match luminaire and gasketed to provide a weather-tight seal to the housing. Back plate mounts to the wall surface over 3.5'' octagon junction box with factory-supplied wall anchors. All hardware is stainless steel.
Lamp is positioned within the matte acrylic cylindrical lens providing diffuse symmetrical distribution. Diffused end lens provides subtle radiant glow.
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
13w PL-C - CFQ13W/G24q with G24q-1 base
18w PL-T - CFTR18W/GX24q with GX24q-2 base
B0-U3-G1 for all models.
Standard finish is satin anodized aluminum.
Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer's limited warranty.