Cylindrical base with bias cut at top of shaft is constructed from 0.157'' nominal wall, 6061-T6 aluminum tubing.. Handhole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Cylindrical lens is impact-resistant matte acrylic and enclosed at the bottom with an alignment plate assembly. Assembly positions the bottom mounted auxilliary reflector inside the lens to the bias cut of the base within the luminaire. Lens assembly is secured with stainless steel socket head cap screws from inside the base. Fabricated aluminum top cap houses the primary reflector and is gasketed to create a weather-tight seal to the lens. Top cap is secured to the lens with two socket head cap screws.
Four RGBW arrays consisting of red, green, blue, and white high brightness LEDs with aluminum core circuit board are mounted at the base of the lens. The LED chips are fitted with high-efficiency spot distribution lenses, projecting light upward to the specular reflector located in the top cap to provide even, diffused illumination along the length of the lens without striations. Cylindrical lens is impact-resistant, non-yellowing, matte acrylic with 86% transmittance. Lens shall have excellent diffusion properties to produce homogenous, uniform horizontal and vertical illumination. The textured lens surface is fingerprint and scratch resistant for enhanced service life.
Universal LED driver is mounted in a weather-proof enclosure at the base of the column and operates on 120v through 277v AC input. Maximum power consumption is 17 watts. Driver includes dimming control options for pre-programmed color changing sequencing or DMX control capability with optional interface.
Luminaire mounts to wall in four places with hardware provided by others.
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.