One-piece luminaire housing and fitter are die-cast aluminum. Housing includes compartment for LED optical system and driver. Hinged aluminum door frame with bonded UV-stabilized prismatic lens is sealed to the housing with one-piece profiled silicone gasket when closed and secured with a single latch assembly. Formed aluminum door latch is flush to the housing when closed and provides tool-less access to the field replaceable LED light engine and driver. Luminaire mounts to 3'' O.D. tenon on bracket and is secured with two setscrews. Luminaire tilt angle may be adjusted from 0° to 15° in five degree increments. All hardware is stainless steel.
Optics include a choice of two or three individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.
LED DELIVERED LUMEN OUTPUT / BUG RATING
Type II: 5068 lumens / B1-U0-G1
Type III: 5126 lumens / B1-U0-G1
Type IV: 4639 lumens / B1-U0-G1
Type II: 7602 lumens / B1-U0-G1
Type III: 7689 lumens / B2-U0-G1
Type IV: 6959 lumens / B2-U0-G1
Type II: 5398 lumens / B1-U0-G1
Type III: 5459 lumens / B2-U0-G1
Type IV: 4941 lumens / B1-U0-G1
Type II: 8096 lumens / B2-U0-G1
Type III: 8189 lumens / B2-U0-G1
Type IV: 7411 lumens / B2-U0-G2
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 72 watts for models with two modules and 108 watts for models with three modules. Optional 0-10v DC dimming is available on request.
Fabricated aluminum bracket assembly is composed of two side sections welded to horizontal plate section and wall mounting plate. Bracket assembly mounts over junction box and is secured to wall in four places.
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic, dark grey metallic, or graphite grey. Special colors available on request.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.