Wedge-shaped housing is cast from high-grade aluminum alloy with integrated cooling fins to enhance heat dissipation. Segregated ballast compartment with separate cast aluminum cover is thermally isolated from the optical system, ensuring optimal operating environment for electrical components. Frameless tempered glass lens is sealed with closed cell silicone gasketing when closed. Hinged lens is retained by two quarter turn fasteners for tool-less access. Braided stainless steel line houses weatherproof electrical cord, terminating in watertight couplings at both ends. Housing is adjustable to 0?, 10?, 20?, 30?, or 40? above horizontal by means of two precision machined polished stainless steel knobs and locked into place with two regressed locking bolts.
Optics include 2 individual LED modules. Each module consists of an aluminum core PCB with fourteen high-power LEDs and a single piece prismatic lens molded from optical quality acrylic. The prismatic lens redirects light output from the individual LEDs and is available in two distributions as a Type II (S optics) or Type III distribution (ME optics). Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades.
Electronic LED driver supplies 500mA drive current to LED modules with input voltage range from 120v to 277v at 50/60Hz. Power consumption is 50 watts.
LED DELIVERED LUMEN OUTPUT
3000K - Type II = 3238 lumens / Type III = 3182 lumens
4000K - Type II = 3691 lumens / Type III = 3628 lumens
B1-U0-G1 for all models.
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting.
LUMINAIRE WEIGHT: 25 lbs
LUMINAIRE EPA: 0.33 sq ft
INGRESS PROTECTION: IP65
CERTIFICATION: CSA Certified for Wet Locations
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.