Rectangular luminaire housing with integral fitter is extruded aluminum showing no visible welds. Frameless tempered glass lens is hinged and secured in place with a single stainless steel quarter-turn fastener for tool-less relamping. Lens seals to the housing with one-piece silicone gasketing when closed. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire mounts to tenon on wall bracket and secured with four socket head cap screws on top of the housing. All hardware is stainless steel.
Horizontal lamp is positioned within the three piece hydroformed facetted reflector with specular finish. Lens is clear tempered glass. Optional matte glass lens is available upon request.
Ceramic metal halide core and coil ballast with class ''H'' (180?C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast shall be capable of reliable starting to -20?F (-30?C) at nominal line voltage of ?10%. Ballast, capacitor, and starter are UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated. G12 base porcelain socket is 660w-600v, 5kV pulse rated.
70w T6, G12 base ceramic metal halide
150w T6, G12 base ceramic metal halide
LUMINAIRE WEIGHT: 22 lbs
LUMINAIRE EPA: 1.3 sq. ft
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
CERTIFICATION: CSA Certified for Wet Locations
INGRESS PROTECTION: IP65
Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer's limited warranty.