Luminaire housing, cover, and bracket are cast aluminum. Luminaire cover provides top access to electrical components and optics. Flat lens with decorative screen-printing is clear tempered glass and bonded to housing with silicone for a weather tight seal. Housing is fitted with stainless steel weather-tight strain relief bushing for power cable exiting rear of the luminaire. All hardware is stainless steel.
Optics include choice of two or three LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece prismatic lens molded from optical quality acrylic. Light distributions are available as a Type II (S optics)or Type III (ME optics). Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones.
LED DELIVERED LUMEN OUTPUT / BUG RATING (Type III)
2 Modules: 68 watts
3000K: 4296 lumens / B1-U3-G1
4000K: 4669 lumens / B1-U3-G1
3 Modules: 102 watts
3000K: 6628 lumens / B2-U3-G1
4000K: 7204 lumens / B2-U3-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 500mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Optional 0-10v DC dimming is available on request.
Wall mounting plate installs over the junction box and is secured to the surface in four places with hardware provided by others.
Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
LUMINAIRE WEIGHT: 37 lbs
LUMINAIRE EPA: 0.33 sq ft
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer?s limited warranty.