Luminaire consists of cylindrical housing, base, and top cap precision machined from 6060 aluminum. Cylindrical housing with 180-degree lens aperture is machined from tubing with nominal wall thickness of 0.60'' and mounts over the precision-machined luminaire base with three concealed socket head cap screws. Cylindrical matte acrylic lens mounts to the base inside the housing. Luminaire top cap mounts to the cylindrical housing with three captive socket head caps screws and provides access to luminaire for relamping. Luminaire base and top cap are grooved to accept one-piece silicone gasket to provide weather-tight seal to the lens. Luminaire mounts to surface over single gang switch box with factory supplied hardware and wall anchors. All hardware is stainless steel.
LED light engine with electrical disconnect is top mounted to the machined aluminum top cap, which acts as a heat sink for thermal management. LED is positioned within the matte acrylic cylindrical lens providing 180-degree distribution through housing aperture.
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LEDs is 350 mA for standard output and 620 mA for high output models.
LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
Standard Output:18 watts
3000K: 427 lumens / B0-U2-G1
4000K: 460 lumens / B0-U2-G1
High Output: 28 watts
3000K: 607 lumens / B0-U2-G1
4000K: 756 lumens / B1-U2-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE WEIGHT: 10 lbs
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.