Luminaire housing with integral slip fitter is cast aluminum with cooling fins to enhance heat dissipation. One-piece cast aluminum door frame is secured to the housing with four captive socket head cap screws and gasketed with one-piece closed cell silicone gasket to provide a weather tight seal. Clear tempered glass lens is bonded to the door frame, forming a flush fit to the exterior surface. Sail with integral ribbing is cast aluminum and supported by two extruded aluminum stanchions. Housing, sail, and stanchion arms are painted to match. All hardware is stainless steel.
Horizontal lamp is housed in stucco patterned anodized aluminum reflector, laser cut for precise reproduction. Sail reflector material is profiled matte anodized aluminum and mechanically retained to the adjustable sail. Sail is field adjustable and fixed in place by tightening two machined anodized aluminum adjustment knobs.
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
LAMPING / BUG RATING
26w PL-C / CFQ26W/G24q/835 - B0-U5-G1
Fabricated steel bracket assembly mounts over 3 1/2'' octagon box and is secured to the wall in four places with factory supplied hardware. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting.
Housing is cleaned in an ultrasonic detergent bath prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
LUMINAIRE WEIGHT: 10 lbs
UL Listed for Wet Locations
Limited product warranty period is three years. Lamps and ballasts shall carry the respective manufacturer's limited warranty.