Luminaire housing with integral ballast assembly is cast from high-grade aluminum alloy with heavy cooling fins to enhance heat dissipation. Door frame is one-piece cast aluminum and hinged for easy maintenance. Machined tempered glass lens is mechanically retained and bonded to the door frame forming a flush fit to the exterior surface. Door assembly is sealed with closed cell silicone gasketing and secured by two captive socket head cap screws. Reflector sail with integral ribbing is cast aluminum and supported by two cast aluminum stanchions. Stanchion mounting holes in the housing are machined and fitted with stainless steel helical thread inserts. Fabricated steel slip fitter bolts to housing with four socket head bolts. Slip fitter mounts to 1.8'' O.D. tenon and has built-in stop to limit insertion depth to 2.75''. Two offset rows of three recessed setscrews secure and level luminaire to the tenon. All hardware is stainless steel.
Single COB LED is positioned within specular anodized aluminum reflector, laser cut for precise reproduction. Sail reflector material is profiled matte anodized aluminum and is mechanically retained and bonded to the adjustable sail. Sail is field adjustable to 0?, 15?, 30?, 45?, or 60? above horizontal and fixed in place with stainless steel locking screws. Precision-machined anodized aluminum adjustment knobs securely lock the sail in place.
Electronic LED driver supplies 700mA drive current to the COB LED in the standard output model, or 1050mA for the high output model. Universal driver accepts input voltage range from 120v to 277v at 50/60Hz. Power consumption is 28 watts for standard output, or 53 watts for high output model. Power factor is greater than 0.95.
LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
Standard Output:28 watts
3000K: 1326 lumens / B0-U3-G2
4000K: 1644 lumens / B0-U3-G2
High Output: 53 watts
3000K: 2040 lumens / B0-U3-G2
4000K: 2530 lumens / B0-U3-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places. Tenon is 1.8'' O.D. and welded to square steel tubing with 0.118'' wall thickness. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting.
LUMINAIRE WEIGHT: 56 LBS
LUMINAIRE EPA: 3.9 SQ FT
Housing is cleaned in an ultrasonic detergent bath prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
INGRESS PROTECTION: IP54
CSA Certified for Wet Locations
Limited product warranty period including the LEDs is five years. LED driver shall carry the respective manufacturer's limited warranty.