Luminaire housing with integral fitter is cast aluminum. Four vertical rods fastened to the housing support the optical system and act as a wireway to provide power to the lamp socket. Conical lens is clear acrylic and sealed with one-piece silicone gaskets to provide a weathertight seal when closed. Spun aluminum roof includes an integral decorative perforated stainless steel fascia which surrounds the reflector when closed. A stainless steel thumbscrew secures the roof to the luminaire, allowing tool-less access for relamping. Luminaire mounts to tenon on pole and secured with two offset rows of three regressed setscrews. Luminaire slipfits over 3" OD tenon with insertion depth of 4.2". All hardware is stainless steel.
Vertical lamp is positioned within the facetted reflector for optimal distribution. Reflector is formed from high-reflectance pre-anodized aluminum with textured micro-surface to efficiently distribute light and minimize brightness. Specify Type V or Type III distribution pattern. Conical lens is clear acrylic.
Electronic ballast is located in the base of the luminaire housing. Powerpack may be replaced via a quick disconnect for easy maintenance. Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -20?F (-30?C) at nominal line voltage. Ballast is UL and CSA recognized. G12 base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING / DISTRIBUTION / BUG RATING
70w T6 ceramic metal halide - CDM70/T6/830 - Type III - B2-U3-G2
70w T6 ceramic metal halide - CDM70/T6/830 - Type V - B2-U3-G1
150w T6 ceramic metal halide - CDM150/T6/830 - Type III - B3-U3-G3
150w T6 ceramic metal halide - CDM150/T6/830 - Type V - B3-U3-G2
Fabricated steel mounting bracket mounts over junction box and is secured to wall in four places.
LUMINAIRE WEIGHT: 25 lbs
LUMINAIRE EPA: 2.3 sq ft
Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
INGRESS PROTECTION: IP65
CSA/US Certified for Wet Locations
Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer?s limited warranty.