Luminaire consists of base, lens with decorative ring assembly, and secondary reflector with support struts. Decorative ring assembly surrounding lens is secured to the base with socket head cap screws and consists of aluminum rings separated by spacers. Simple cast aluminum luminaire base with integral slipfitter anchors three cast aluminum indirect reflector support struts with socket head cap screws and provides mounting surface for the optical assembly. Borosilicate glass lens has clear top with etched sidewalls and is sealed by compression to the luminaire base with single piece closed cell rubber gasket when the decorative ring assembly is installed. Top ring of assembly is separated from the glass lens with single piece ''D'' profile silicone gasket to prevent glass to metal contact. Spun aluminum indirect reflector is finished in high-reflectance white paint. Luminaire slipfits tenon on wall mounting bracket and has built-in stop to limit insertion depth to 4.5''. Two offset rows of three 8mm recessed setscrews secure the luminaire to the tenon. All hardware is stainless steel.
Vertical base down lamp and specular narrow beam reflector project light through the clear borosilicate lens top onto the secondary reflector, providing a symmetrical distribution. Etched sidewall on lens provides a subtle radiant glow.
Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage. Ballast is UL and CSA recognized. G12 base porcelain socket is 660w-600v, 4kV pulse rated. Ballast is remote mounted in the wall mounting bracket.
39w T6 ceramic metal halide - G12 base
70w T6 ceramic metal halide - G12 base
150w T6 ceramic metal halide - G12 base
Wall mounting bracket is fabricated aluminum and mounts to wall surface in four places with hardware supplied by others.
LUMINAIRE WEIGHT: 15 LBS
LUMINAIRE EPA: 1.7 SQ FT
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
CERTIFICATION: UL Listed for Wet Locations
INGRESS PROTECTION: IP54
Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer's limited warranty.