Ringed cage is fabricated from high strength 6061 aluminum alloy. Clear acrylic cylindrical lens assembly installs onto mounting plate at the bottom of the cage assembly and is secured with three socket head cap screws. Lens is sealed with one-piece silicone gasket. Power cable is sealed with weather-tight bushing. All hardware is stainless steel.
Optical assembly consists of one LEVO C LED module mounted within the cylindrical clear acrylic lens. The module consists of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, IV, or V optics. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades. CRI is 80+.
Electronic LED driver supplies 700mA drive current to the LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 37 watts. Optional 0-10v DC dimming is available on request.
DELIVERED LUMEN OUTPUT / BUG RATING
Type 2 = 3248 lumens / B1-U1-G1
Type 3 = 3356 lumens / B1-U2-G1
Type 4 = 3261 lumens / B1-U1-G1
Type 5 = 3542 lumens / B2-U1-G1
Type 2 = 3456 lumens / B1-U1-G1
Type 3 = 3571 lumens / B1-U2-G1
Type 4 = 3469 lumens / B1-U1-G1
Type 5 = 3768 lumens / B2-U1-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
WEIGHT: 40 lbs
EPA: 3.1 sq ft
Stepped steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.126". Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole top tenon shall show no visible weld at the transition to the luminaire. Two rows of four recessed setscrews secure the luminaire to the top of the pole. Decorative ring is welded to pole at the stepped transition. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. One-piece base cover is 0.080'' spun aluminum and finished to match the pole. Specify 12' or 14' nominal pole height with 4' step.
Standard finish is finely textured dark grey, graphite grey, or matte silver grey metallic. Special colors available on request.
INGRESS PROTECTION: IP54
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.