Luminaire base with integral fitter and top are cast aluminum. Clear acrylic cylindrical lens with bonded cast aluminum top twists and locks onto the housing without the use of tools. Luminaire base houses the electrical components and is secured to pole top with two rows of three recessed setscrews. Weather-tight bushing at base of housing provides a weather-tight seal.
Optics are comprised of one individual LED module consisting of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. The prismatic lens redirects light output from the individual LEDs and is available in two distributions as a Type III or Type V distribution. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v to 277v at 50/60Hz. Power consumption is 34 watts. 0-10vDC dimming available on request.
LED DELIVERED LUMEN OUTPUT
3000K - Type III = 2832 lumens / Type V = 2824 lumens
4000K - Type III = 2937 lumens / Type V = 2933 lumens
3000K - Type III = B1-U3-G2 / Type V = B1-U3-G1
4000K - Type III = B1-U3-G2 / Type V = B2-U3-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Round straight pole is available in aluminum or steel.
Round straight steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.126". Pole shall show no seam along shaft. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10', 12' or 14' overall.
Aluminum pole is manufactured from seamless 6061 aluminum tubing with nominal wall thickness of 0.187". Pole is heat treated to produce a T6 temper. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Tenon is machined to match the inside diameter of the pole, then inserted into the pole shaft and plug welded, showing no visible weld at the transition. One-piece base cover is 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10', 12', or 14' overall.
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured dark grey, graphite grey, or matte silver grey metallic. Special colors available on request.
LUMINAIRE WEIGHT: 25 lbs
LUMINAIRE EPA: 1.5 sq ft
INGRESS PROTECTION: IP65
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.