One-piece die-cast aluminum housing features integral compartment for reflector and electrical components. Optical and electrical compartment is sealed to the lens with one-piece profiled silicone gasket when closed. Frameless tempered glass lens is secured with a single latch assembly, providing tool-less access for relamping. Push button latch on the hinged reflector plate allows tool-less access to the electrical components. Tray mounted electrical components are removed by loosening two thumbscrews and single electrical disconnect for ease of maintenance. Luminaire mounts to 3'' O.D. tenon on bracket and is secured with two setscrews. Luminaire tilt angle may be adjusted from 0° to 15° in five degree increments. All hardware is stainless steel.
Optics include a choice of three or four individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.
LED DELIVERED LUMEN OUTPUT / BUG RATING
Type II: 7602 lumens / B1-U0-G1
Type III: 7689 lumens / B2-U0-G1
Type IV: 6959 lumens / B2-U0-G1
Type II: 10,136 lumens / B2-U0-G1
Type III: 10,252 lumens / B2-U0-G1
Type IV: 9278 lumens / B2-U0-G2
Type II: 8096 lumens / B2-U0-G1
Type III: 8189 lumens / B2-U0-G1
Type IV: 7411 lumens / B2-U0-G2
Type II: 10,795 lumens / B2-U0-G2
Type III: 10,918 lumens / B3-U0-G1
Type IV: 9882 lumens / B2-U0-G2
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 108 watts for models with three modules and 144 watts for models with four modules. Optional 0-10v DC dimming is available on request.
Fabricated steel bracket assembly is composed of two steel plate side sections welded to horizontal steel plate and slip fitter. Integral slip fitter has two rows of three recessed stainless steel setscrews and has built-in stop to limit insertion depth to 4.5''. Bracket is available in single or twin mount configurations. Bracket is hot-dip galvanized inside and out, then lightly sanded prior to painting.
Round tapered steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.142''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. One-piece base cover is 0.080'' spun aluminum and finished to match the pole. Specify 26' or 33' nominal pole height.
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic, dark silver grey metallic, or graphite grey. Special colors available on request.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.