One-piece luminaire base is precision-machined from 6060 billet aluminum, then satin anodized. Cylindrical matte acrylic lens with two guide pins twists and locks onto luminaire base and is secured with two recessed setscrews. One-piece closed cell silicone gasketing provides a weather-tight seal to the housing. Housing fastens to an internal mounting plate in the pole top and is sealed to the pole with a one-piece closed-cell silicone gasket. Electrical components mount to plate on the underside of the housing and are housed in the top of the pole. All hardware is stainless steel.
LED module consists of four vertically oriented LED arrays mounted to a square profile aluminum extrusion with internal fins. Matte acrylic lens diffuses the individual LEDs while minimizing brightness of the diodes.
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Two electronic LED drivers supply 700mA drive current to two linear LED circuit boards, respectively. Each driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts.
DELIVERED LUMENS / BUG RATING
3000K: 4918 lumens - B1-U5-G3
4000K: 6098 lumens - B2-U5-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE WEIGHT: 8 lbs
LUMINAIRE EPA: 0.3 sq ft
Inverted tapered steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Circular collar welded at the base of the pole provides transition between the round beveled flange plate and pole shaft. Luminaire mounting plate, welded inside the pole top, is drilled and tapped to accept fasteners for securing the luminaire. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 7.5'. Pole mounts to anchor base plate assembly with four M12 x 20mm stainless steel socket head cap screws and washers. See pole data sheet for mounting details.
Anchor base assembly consists of four 1/2'' x 15'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
Housing is satin anodized aluminum. Standard finish for pole is finely textured matte silver gray metallic. Special colors available on request.
INGRESS PROTECTION: IP54
CERTIFICATION: CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.