Luminaire base with integral fitter is cast aluminum and is secured to pole top with three recessed setscrews. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools providing access for relamping. Luminaire is available in single or twin mount configurations. Electrical gear is located in the luminaire base.
LED module consists of four vertically oriented LED arrays mounted to a square profile aluminum extrusion with internal fins. Matte acrylic lens diffuses the individual LEDs while minimizing brightness of the diodes.
Electrical components are mounted in the electrical compartment at the base of the luminaire housing. Two electronic LED drivers supply 700mA drive current to two linear LED circuit boards, respectively. Each driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts.
DELIVERED LUMENS / BUG RATING
3000K: 4918 lumens / B1-U5-G3
4000K: 6098 lumens / B2-U5-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Upper shaft of laddered steel pole and integral bracket arms are fabricated from two parallel 0.114" thick rectangular tube sections separated by horizontal steel plates welded at evenly spaced intervals along the length of the shaft. Bracket arms have integral tenon to accept luminaires. Shaft at base of pole is cold drawn over mandrel, electric-weld, mechanical square steel tubing with nominal wall thickness of 0.157". Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 12'. Pole ships pre-wired with fish-tape.
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
INGRESS PROTECTION: IP65
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.