Luminaire base with integral fitter is cast aluminum and is secured to pole top with three recessed setscrews. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools providing access to the electrical compartment. Luminaire is available in single or twin mount configurations. Electrical gear is located in the luminaire base.
LED module consists of four vertically oriented LED arrays mounted to a square profile aluminum extrusion with internal fins. Matte acrylic lens diffuses the individual LEDs while minimizing brightness of the diodes.
Electrical components are mounted in the electrical compartment at the base of the luminaire housing. Two electronic LED drivers supply 700mA drive current to two linear LED circuit boards, respectively. Each driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts. Optional 0-10v dimming available on request.
DELIVERED LUMENS / BUG RATING
3000K: 4918 lumens / B1-U5-G3
4000K: 6098 lumens / B2-U5-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Stepped steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.126". Pole shall show no seam along shaft. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10' overall with 3' step or 12' overall with 4' step.
Aluminum pole is manufactured from seamless 6061 aluminum tubing with nominal wall thickness of 0.187". Pole is heat treated to produce a T6 temper. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Tenon is machined to match the inside diameter of the pole, then inserted into the pole shaft and plug welded, showing no visible weld at the transition. One-piece base cover is 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10' overall with 3' step or 12' overall with 4' step.
Optional twin mount bracket assembly is fabricated from steel, then hot-dip galvanized. Insertion depth is 4". Assembly slip fits 3" O.D. pole and is secured with two rows of three 8mm stainless steel setscrews. Bracket assembly ships pre-wired with fish tape.
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
INGRESS PROTECTION: IP65
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.