Luminaire is fabricated from aluminum to form a sealed enclosure which houses the LED light engine and driver. Luminaire housing is mounted semi-regressed into the rectangular profile pole and is accessed with a single thumb screw mechanism for tool-less entry. Horizontal flat lens is clear tempered glass. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the luminaire inside the pole. All hardware is stainless steel.
Optics include one or two individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.
LED DELIVERED LUMEN OUTPUT / BUG RATING
Type II: 2534 lumens / B1-U0-G0
Type III: 2563 lumens / B1-U0-G0
Type IV: 2320 lumens / B1-U0-G0
Type II: 5068 lumens / B1-U0-G1
Type III: 5126 lumens / B1-U0-G1
Type IV: 4639 lumens / B1-U0-G1
Type II: 2699 lumens / B1-U0-G0
Type III: 2730 lumens / B1-U0-G0
Type IV: 2470 lumens / B1-U0-G1
Type II: 5398 lumens / B1-U0-G1
Type III: 5459 lumens / B2-U0-G1
Type IV: 4941 lumens / B1-U0-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 36 watts for models with one module and 72 watts for models with two modules. Optional 0-10v DC dimming is available on request.
Curvilinear pole with 7.5" x 3.5" nominal cross section is formed from seamless 6061 aluminum extrusion and heat treated to produce a T5 temper. Nominal wall thickness is 3/16". Pole mounting base with internal flange is fabricated from aluminum and shows no visible welds. Access door with triangular locking mechanism at rear of base provides entry for securing pole to the internal anchor bolts and connection to power. Nominal pole height is 14'. See PARCO 300 for 10' pole or PARCO 360 for 12' pole.
Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.