Wedge-shaped housing is cast from high-grade aluminum alloy with integrated cooling fins to enhance heat dissipation. Segregated ballast compartment with separate cast aluminum cover is thermally isolated from the optical system, ensuring optimal operating environment for electrical components. Door assembly is one piece brushed stainless steel and sealed with closed cell silicone gasketing when closed. Hinged door is retained by two captive stainless steel socket head cap screws for ease of maintenance. Braided stainless steel line houses weatherproof electrical cord, terminating in watertight couplings at both ends. Housing is adjustable to 0°, 10°, 20°, 30°, or 40° above horizontal by means of two precision machined polished stainless steel knobs and locked into place with two regressed locking bolts. Hot-dip galvanized steel mounting bracket with integral slip fitter for 3.25" O.D. tenon has two offset rows of three stainless steel setscrews to secure and level luminaire to the pole.
Optics include a choice of two or three individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.
LED DELIVERED LUMEN OUTPUT / BUG RATING
Type II: 5068 lumens / B1-U1-G1
Type III: 5126 lumens / B1-U1-G1
Type IV: 4639 lumens / B1-U1-G1
Type II: 7602 lumens / B1-U1-G1
Type III: 7689 lumens / B2-U1-G1
Type IV: 6959 lumens / B2-U1-G1
Type II: 5398 lumens / B1-U1-G1
Type III: 5459 lumens / B2-U1-G1
Type IV: 4941 lumens / B1-U1-G1
Type II: 8096 lumens / B2-U1-G1
Type III: 8189 lumens / B2-U1-G1
Type IV: 7411 lumens / B2-U1-G2
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 72 watts for models with two modules and 108 watts for models with three modules. Optional 0-10v DC dimming is available on request.
LUMINAIRE EPA: 1.1 sq ft
LUMINAIRE WEIGHT: 59 lbs
Straight round steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.142". Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Tenon is machined and inserted into the pole shaft then plug welded, showing no visible weld at the transition. Shaft is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080" spun aluminum and finished to match the pole. Specify pole height of 12', 15', or 20' overall nominal height.
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
INGRESS PROTECTION: IP54
CERTIFICATION: CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Drivers shall carry the respective manufacturer's limited warranty.