Wedge-shaped housing is cast from high-grade aluminum alloy with integrated cooling fins to enhance heat dissipation. Segregated ballast compartment with separate cast aluminum cover is thermally isolated from the optical system, ensuring optimal operating environment for electrical components. Frameless tempered glass lens is sealed with closed cell silicone gasketing when closed. Hinged lens is retained by two quarter turn fasteners for tool-less access. Braided stainless steel line houses weatherproof electrical cord, terminating in watertight couplings at both ends. Housing is adjustable to 0°, 10°, 20°, 30°, or 40° above horizontal by means of two precision machined polished stainless steel knobs and locked into place with two regressed locking bolts. Hot-dip galvanized steel mounting bracket with integral slip fitter for 2 3/8'' O.D. tenon has two offset rows of three stainless steel setscrews to secure and level luminaire to the pole.
Horizontal lamp is housed in small hammer tone, bright finish optical system, laser cut for precise reproduction. Clear tempered glass lens is 0.20'' thick and bonded with silicone to the door frame. Optional matte glass lens is available upon request.
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to 0°F (-18°C) at nominal line voltage and frequency of ±10%. GX24q-4 lamp socket is 75w-600v rated.
42w compact fluorescent - PL-T42W/830/4P with GX24q-4 socket
BUG RATING: B1-U0-G0
Straight round steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.126''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Tenon is machined and inserted into the pole shaft then plug welded, showing no visible weld at the transition. Shaft is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080'' spun aluminum and finished to match the pole. Specify pole height of 10' or 12' overall nominal height.
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
LUMINAIRE WEIGHT: 25 lbs
LUMINAIRE EPA: 0.43 sq ft
INGRESS PROTECTION: IP65
CERTIFICATION: UL Listed for Wet Locations
Limited product warranty period is three years. Lamps and ballasts shall carry the respective manufacturer's limited warranty.