Rectangular luminaire housing with integral fitter is extruded aluminum. Frameless tempered glass lens is hinged and secured in place with a single stainless steel quarter-turn fastener for tool-less relamping. Lens seals to the housing with one-piece silicone gasketing when closed. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire mounts to tenon on pole and secured with four socket head cap screws on top of the housing. All hardware is stainless steel.
Horizontal lamp is positioned within the three piece hydro-formed facetted reflector with specular finish. Lens is clear tempered glass. Luminaire distribution is Type II full cut-off, suitable for use in all LEED lighting zones. Optional matte glass lens is available upon request.
Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -20?F (-30?C) at nominal line voltage. Ballast is UL and CSA recognized. G12 base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING / BUG RATING
150w T6 ceramic metal halide - CDM150/T6/830 - B2-U0-G2
70w T6 ceramic metal halide - CDM70/T6/830 - B1-U0-G1
39w T6 ceramic metal halide - CDM35/T6/830 - B1-U0-G1
LN800 LUMINAIRE WEIGHT: 26 lbs
LN800 LUMINAIRE EPA: 1.6 sq. ft
LN450 LUMINAIRE WEIGHT: 22 lbs
LN450 LUMINAIRE EPA: 1.3 sq. ft
Straight rectangular pole is 6.3" x 3.5" nominal and manufactured from cold drawn over mandrel, electric weld, mechanical steel tubing with nominal wall thickness of 0.197". Sides of shaft are flat with 1/2" radiussed corners. Pole shall show no seam along the shaft. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 26' with lower pedestrian luminaire mounted at 15'.
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
CERTIFICATION: CSA Certified for Wet Locations
INGRESS PROTECTION: IP65
Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer's limited warranty.